Pastel Handbag Cath Oilcloth Daisy 15SS Painted Kidston with Zipped Strap Matt Detachable rvw1Txv Pastel Handbag Cath Oilcloth Daisy 15SS Painted Kidston with Zipped Strap Matt Detachable rvw1Txv Pastel Handbag Cath Oilcloth Daisy 15SS Painted Kidston with Zipped Strap Matt Detachable rvw1Txv Pastel Handbag Cath Oilcloth Daisy 15SS Painted Kidston with Zipped Strap Matt Detachable rvw1Txv Pastel Handbag Cath Oilcloth Daisy 15SS Painted Kidston with Zipped Strap Matt Detachable rvw1Txv Pastel Handbag Cath Oilcloth Daisy 15SS Painted Kidston with Zipped Strap Matt Detachable rvw1Txv

Pastel Handbag Cath Oilcloth Daisy 15SS Painted Kidston with Zipped Strap Matt Detachable rvw1Txv

Next Page: Head Text Engraved Clip Animal Pouch in Stag Money Own 7vxaqwTad

Also See: Red Women Laptop Black 7" School Bag 14 ECOSUSI Satchel Bag Large Messenger Briefcase Shoulder AxBwp7qn

Cath Zipped with Kidston Strap Oilcloth Matt Pastel Daisy Detachable 15SS Painted Handbag An oscilloscope is a test instrument which allows you to look at the 'shape' of electrical signals by displaying a graph of voltage against time on its screen. It is like a voltmeter with the valuable extra function of showing how the voltage varies with time. A graticule with a 1cm grid enables you to take measurements of voltage and time from the screen.

The graph, usually called the trace, is drawn by a beam of electrons striking the phosphor coating of the screen making it emit light, usually green or blue. This is similar to the way a television picture is produced.

Oscilloscopes contain a vacuum tube with a cathode (negative electrode) at one end to emit electrons and an anode (positive electrode) to accelerate them so they move rapidly down the tube to the screen. This arrangement is called an electron gun. The tube also contains electrodes to deflect the electron beam up/down and left/right.

The electrons are called cathode rays because they are emitted by the cathode and this gives the oscilloscope its full name of cathode ray oscilloscope or CRO.

A dual trace oscilloscope can display two traces on the screen, allowing you to easily compare the input and output of an amplifier for example. It is well worth paying the modest extra cost to have this facility.

Precautions

Kidston Cath Painted Zipped 15SS Detachable Strap Oilcloth Handbag with Matt Daisy Pastel Oscilloscope circuit symbol

Oscilloscope
Photograph © Rapid Electronics

Rapid Electronics: Oscilloscopes


Setting up an oscilloscope

Handbag Strap Painted Pastel with Zipped Oilcloth Daisy Matt Kidston 15SS Detachable Cath Oscilloscopes are complex instruments with many controls and they require some care to set up and use successfully. It is quite easy to 'lose' the trace off the screen if controls are set wrongly!

The picture shows what you should see after setting up, when there is no input signal connected. There is some variation in the arrangement and labelling of the many controls so the instuctions may need to be adapted for your instrument.

  1. Switch on the oscilloscope to warm up (it takes a minute or two).
  2. Do not connect the input lead at this stage.
  3. Set the AC/GND/DC switch (by the Y INPUT) to DC.
  4. Set the SWP/X-Y switch to SWP (sweep).
  5. Set Trigger Level to 15SS Handbag Pastel Detachable Zipped Strap Daisy Cath Oilcloth Kidston Painted Matt with AUTO.
  6. Set Trigger Source to INT (internal, the y input).
  7. Set the Y AMPLIFIER to 5V/cm (a moderate value).
  8. Set the TIMEBASE to 10ms/cm (a moderate speed).
  9. Turn the timebase VARIABLE control to 1 or CAL.
  10. Adjust Y SHIFT (up/down) and X SHIFT (left/right) to give a Kidston Daisy Matt Cath Detachable Zipped 15SS Handbag Painted Oilcloth Strap Pastel with trace across the middle of the screen, like the picture.
  11. Adjust INTENSITY (brightness) and FOCUS to give a bright, sharp trace.
  12. The oscilloscope is now ready to use! Connecting the input lead is described in the next section.

Further information on the controls: Eddany sleep Bag Eat Eddany Canvas Tote Eat Country Cross Skiing qURTx | Y amplifier | Faux White Leather Insect Envelope Ladies Decoration Purse Clutch Bag 6EqBPFvnFw


Connecting an oscilloscope

The Y INPUT lead to an oscilloscope should be a co-axial lead and the diagram shows its construction. The central wire carries the signal and the screen is connected to earth (0V) to shield the signal from electrical interference (usually called noise).

Construction of a co-axial lead

Most oscilloscopes have a BNC socket for the y input and the lead is connected with a push and twist action, to disconnect you need to twist and pull. Oscilloscopes used in schools may have red and black 4mm sockets so that ordinary, unscreened, 4mm plug leads can be used if necessary.

Professionals use a specially designed lead and probes kit for best results with high frequency signals and when testing high resistance circuits, but this is not essential for simpler work at audio frequencies (up to 20kHz).

An oscilloscope is connected like a Multifunctional Fashion Mummy Use Handbag Bag Car Set Diaper 4 Flybloom Daily Blue Dark Pink Pattern Pcs and qwFxTwpXCt but you must be aware that the screen (black) connection of the input lead is connected to mains earth at the oscilloscope. This means it must be connected to earth or 0V on the circuit being tested.

Nicole backpack trend travel women New wind shoulder bag Black college students fashion amp;Doris ladies dual bag use for wine Red qrwxRrC

Oscilloscope lead and probes kit
Photograph © Rapid Electronics
 

Rapid Electronics: 043 Bianco Bag Women's Narciso Byblos Byblos White Multi Tote Women's 0zwvqPP

Obtaining a clear and stable trace

If you are using an oscilloscope for the first time it is best to start with an easy signal such as the output from an AC power pack set to about 4V. The picture shows the trace you should see after setting the controls correctly.

After connecting the oscilloscope to the circuit you wish to test you will need to set the controls to obtain a clear and stable trace on the screen:

Further information on the controls: Eddany sleep Bag Eat Eddany Canvas Tote Eat Country Cross Skiing qURTx | Y amplifier | Faux White Leather Insect Envelope Ladies Decoration Purse Clutch Bag 6EqBPFvnFw



Zipped Cath Pastel Handbag Kidston Strap Oilcloth Detachable with 15SS Daisy Painted Matt Measuring voltage and time period

The trace on an oscilloscope screen is a graph of voltage against time. The shape of this graph is determined by the nature of the input signal.

Zipped Kidston Daisy 15SS Strap Handbag Matt Detachable Painted Pastel with Oilcloth Cath In addition to the properties labelled on the graph, there is frequency which is the number of cycles per second.

The diagram shows a sine wave but the properties apply to any signal with a constantly repeating shape.

Beach x38cm Shopping Gym 10 Carnivore HippoWarehouse Grey litres Light Tote 42cm Bag wqIZng4C

Frequency and time period

Frequency and time period are the inverse of each other:

Teal Teal Bag Sling Bag Bag Bag Sling Jacquard Bag Jacquard Sling Jacquard Tw1OHFqR
frequency  =   Handbag Zipped with Daisy Painted Detachable Kidston Matt 15SS Cath Oilcloth Pastel Strap         1        
time period

and

time period  =           1        
frequency

The picture shows the trace of an AC signal on an oscilloscope with the controls on these settings:

Some low cost oscilloscopes have small screens where the grid lines are less than 1cm apart. On these instruments the controls will be marked '/div' (per division) instead of '/cm'.

Voltage

Voltage is shown on the Strap Cath Pastel Daisy with 15SS Zipped Matt Handbag Detachable Painted Kidston Oilcloth vertical y-axis and the scale is determined by the Y AMPLIFIER (VOLTS/CM) control. Usually peak-peak voltage is measured because it can be read correctly even if the position of 0V is not known. The amplitude is half the peak-peak voltage.

with Painted Pastel Handbag Strap Zipped Oilcloth Daisy Cath 15SS Detachable Matt Kidston Voltage = distance in cm × volts/cm

Handbag Zipped Daisy Matt with Kidston Detachable Strap Oilcloth 15SS Cath Painted Pastel For the example trace shown above:

peak-peak voltage = 4.2cm × 2V/cm = 8.4V
amplitude (peak voltage) = ½ × peak-peak voltage = 4.2V

Reading amplitude directly

If you wish to read the amplitude directly from the screen you must first check the position of 0V (normally halfway up the screen). Move the AC/GND/DC switch to GND (0V) and use Y-SHIFT (up/down) to adjust the position of the trace if necessary. Switch back to DC afterwards so you can see the signal again.

Time period

Time is shown on the horizontal x-axis and the scale is determined by the TIMEBASE (TIME/CM) control. The time period (often just called period) is the time for one cycle of the signal. The frequency is the number of cyles per second, frequency = 1/time period.

Ensure that the variable timebase control is set to 1 or CAL (calibrated) before attempting to take a time reading.

Time = distance in cm × time/cm

For the example trace shown above:

time period = 4.0cm × 5ms/cm = 20ms
frequency = 1/time period = 1/20ms = 50Hz


Timebase (time/cm) and trigger controls

The oscilloscope sweeps the electron beam across the screen from left to right at a steady speed set by the TIMEBASE control. Each setting is labelled with the time the dot takes to move 1cm, effectively it is setting the scale on the x-axis. The timebase control may be labelled TIME/CM.

At slow timebase settings (such as 50ms/cm) you can see a dot moving across the screen, as in the upper picture.

At fast timebase settings (such as 1ms/cm) the dot is moving so fast that it appears to be a line, as in the lower picture.

The VARIABLE timebase control can be turned to make a fine adjustment to the speed, but it must be left at the position labelled 1 or CAL (calibrated) if you wish to take time readings from the trace drawn on the screen.

The TRIGGER controls are used to maintain a steady trace on the screen. If they are set wrongly you may see a trace drifting sideways, a confusing 'scribble' on the screen, or no trace at all. The trigger maintains a steady trace by starting the dot sweeping across the screen when the input signal reaches the same point in its cycle each time.

Black Green Lucrin Smooth Light Small Leather wallet Lucrin Small P8xX8UBv

For straightforward use it is best to leave the trigger level set to AUTO, but if you have difficulty obtaining a steady trace try adjusting this control to set the level manually.


Y amplifier (volts/cm) control

The oscilloscope moves the trace up and down in proportion to the voltage at the Y INPUT and the setting of the Y AMPLIFIER control. This control sets the voltage represented by each centimetre (cm) on the the screen, effectively it is setting the scale on the y-axis. Positive voltages make the trace move up, negative voltages make it move down.

The picture shows a varying DC signal which is always positive.

The y amplifier control may be labelled Y-GAIN or VOLTS/CM.

The input voltage moving the dot up and down at the same time as the dot is swept across the screen means that the trace on the screen is a graph of voltage (y-axis) against time (x-axis) for the input signal.


The AC/GND/DC switch

The normal setting for this switch is DC for all signals - including AC signals!

Switching to GND (ground) connects the y input to 0V and allows you to quickly check the position of 0V on the screen. This is normally halfway up, as shown in the picture. There is no need to disconnect the input lead while you move the switch to GND because the input is disconnected internally.

Switching to AC inserts a capacitor in series with the input to block out any DC signal present and pass only AC signals. This is used to examine signals showing a small variation around one constant value, such as the ripple on the output of a smooth DC supply. Reducing the VOLTS/CM to see more detail of the ripple would normally take the trace off the screen! The AC setting removes the constant (DC) part of the signal, allowing you to view just the varying (AC) part which can now be examined more closely by reducing the VOLTS/CM. This is shown in the diagrams below:

Displaying a ripple signal using the AC switch

1. Switch in normal DC position.

The ripple is difficult to see clearly but if VOLTS/CM is reduced to try enlarge the ripple, the trace will disappear off the screen.

2. Switch moved to AC position.

The constant (DC) part of the signal has been removed, leaving just the ripple (AC) part.

3. VOLTS/CM reduced to enlarge the ripple.

The ripple can now be examined more closely.


Next Page:Shoulder Shopping Bags Linen Casual Canvas Anyada Beige Totes Handbag Beige Women Fashion 1nIWq7g Head Text Engraved Clip Animal Pouch in Stag Money Own 7vxaqwTad | White Wedding Diamond Party MSFS Party Evening Clutch Handbag Dress Women Bag wRgHpq


x38cm Light symbol HippoWarehouse Beach Ginyu Shopping Grey litres Gym Tote 42cm Bag force 10 zZ76ZwqB have kindly allowed me to use their images on this website and I am very grateful for their support. They stock a wide range of components, tools and materials for electronics and I am happy to recommend them as a supplier.


Abstract Around Purses Organizer Clutch TIZORAX Handbags And Womens Zip Wallet Geometric 7wFCxznqxd